The Cyrus III is a conservatively rated 50W per channel integrated amplifier designed to become the core of a quality audio system. Following in footsteps of its well respected Cyrus I & II, the Cyrus III has moved on to address the life style requirements of the 90s as well as having the ability for expansion into a fully integrated audio-visual system. As a first upgrade, a PSX-R will enhance the overall performance of the Cyrus III both in quantity and quality.
Cyrus III features high grade SMD components throughout which assist in topology optimisation resulting in shorter signal paths. This is highly desirable in a quality audio amplifier in helping reduce a multitude of complex distortions and adverse interaction with the environment.
A major design mandate of the amplifier was the total symmetry of the design. This has been substantially achieved throughout the phono, line and the power amplifier sections. The true symmetry is particularly important in the power amplifier stage, that handles high signal currents, to provide stable image and accurate localisation cues.
A sophisticated 180VA toroidal power transformer forms the essential part of the Cyrus III advanced linear Power supply system. The “zero-mechanical-noise” core design of this transformer ensures high performance within an unusually wide AC mains voltage. The patented slotted-foil reservoir capacitors dispel circulating eddy currents in the foil reducing the ESR as well as substantially increasing the effective power supply bandwidth as seen by the amplifiers.
Line inputs - 4 + Tape
Phono inputs - MM
Outputs - Loudspeakers, Tape-out, Preamp-out
Power Supply - 180VA Toroidal transformer with 6 regulated rails
External - Highly regulated PSX-R upgradeable
Communications - MC-BUS™ System BUS
Remote Control - Full function remote control facility
Continuous Power - 50W/CH (both driven into 8 Ohms) 70W/CH (both driven into 4 Ohms)
With PSX-R - 57W/CH (both driven into 8 Ohms) 90W/CH (both driven into 4 Ohms)
Current - 30 Amps peak to peak
Distortion - 0.01%, 1kHz (into 8 Ohms) 0.03%, 1kHz (into 4 Ohms)
Frequency Response - -3 dB, 2Hz and 80kHz
Damping Factor - 100
Sensitivity (50W) - MM: 2.75mV Line: 200mV
Input impedance - 10Kohm (RCA), 22Kohm (BAL)
Output voltage - 200mV (Tape out), 380mV (Pre out)
S/N Ratio - MM: 80dBA (ref. 5mV) Line: 98dBA (ref. 500mV)
Dimensions - (H x W x D) 73 x 215 x 360 (mm)
Weight - 4.6kg
Finish - Black